Tow Rings

Trailer Nose Plates

TNP7165 TNP16100
  • Weldable

Plates allow for 3 different positions. Predrilled nose plates must be reinforced to meet capacity.

  Part # Model Description Hole Size (A) Plate Thickness (B) Wt.
TNP7165 3/4" Nose Plate Use for R-48-A, R-49-A, R-50-A 5/8" 3/4" 24
TNP16100 1" Nose Plate Use for R-50-B, R-51-A 3/4" 1" 32

Adjustable Forged Eye Assemblies

909330 Channel

Assemblies include adjustable forged eye, formed steel channel and grade 8 mounting kit. Do not weld forged rings, only the channel. Do not weld forged rings, only channel. Please note Low Vertical Capacity.

Do not overly torque or tighten nuts to try and take the play out. Failure will occur if nuts and bolts are over-torqued.

  Part # Model Dimensions Max Capacity Wt.
A B C G.T.W V.L.
  2373142 3 Position Channel w/ 048 Ring 2-1/2" 1" 8-1/2" 20,000 1,000 19
  2375144 5 Position Channel w/ 048 Ring 2-1/2" 1" 12-1/2" 20,000 1,000 23
2374143 3 Position Channel w/ 049 Ring 2-1/2" 1-3/8" 8-1/2" 30,000 2,000 22
2376145 5 Position Channel w/ 049 Ring 2-1/2" 1-3/8" 12-1/2" 30,000 2,000 26
  2377303 3 Position Channel w/ 909330 Ring 3" 1-3/8" 8-1/2" 25,000 3,000 22
  2377305 5 Position Channel w/ 909330 Ring 3" 1-3/8" 12-1/2" 25,000 3,000 26
2373142E 0-48 Ring Only, No Channel 2-1/2" 1" N/A 20,000 1,000 8
2374143E 0-49 Ring Only, No Channel 2-1/2" 1-3/8" N/A 30,000 2,000 10
  909330 3" Eye Diameter, No Channel 3" 1-3/8" N/A 25,000 3,000 11.25
Adjustable Forged Eye Mounting Kits
Part # Description
2395165 Mounting Kit

LM/SM and Dynaweld© Rings

These rings are not weldable. All these parts include one bolt, washers and a small mounting plate.

  Part # Model Dimensions Max Capacity Wt.
A B C D E G.T.W. V.L.
DM00122   1-1/2" 1-1/2" 2-1/2" 1-1/2" 4-1/2" 30,000  6,000 34
DM01123   2" 2" 3" 1-1/2" 4-1/2" 60,000   42
DM01124   1-1/2" 1-1/2" 3" 1-1/2" 4-1/2" 30,000  6,000 34

2300122 R-51-SM Plate 1-5/8" 1-3/4" 3" 1-5/8" 3-1/2" 30,000  6,000 36

2301123 R-51-LM Plate 1-5/8" 2" 3" 1-5/8" 4-1/2" 60,000   44

LM/SM Mounting Plates

  Part # Model Description Wt.
2304205 R-51-SM Plate 15-5/8" height, 5-7/8" width, 1" thick, 3-1/2" center to center hole spacing 26
2305206 R-51-LM Plate 15-5/8" height, 5-/8" width, 1" thick, 4-1/2" center to center hole spacing 26

Fish Tail Tow Rings

  • Weldable

  Part # Model Dimensions Max Capacity Wt.
A B C D G.T.W V.L.
2069124 0-51 FT 3" 10" 4" 3-3/8" 20,000 4,000 13.25
2069120 0-51 LT 3" 12" 6" 3-7/8" 20,000 4,000 16.5

Dimensions "B" and "C" should only be welded for mounting.

 

 

  • Weldable

 

Tow Rings

 

H-51-A

  Part # Model Dimensions Max Capacity Wt.
A C D Flat Thickness G.T.W V.L.
2065136 0-48-A 2-1/2" 2-1/2" 1" 5/8" 10,000 1,000 4
2065130 0-49-A 2-1/2" 2" 1-3/8" 1" 10,000 2,000 7
2065135 H-51-A 3" 2-1/2" 1" 5/8" 10,000 1,000 4.5

Dimensions "B" and "C" should only be welded for mounting.


6508 Tow Ring

  • Weldable

  Part # Model Max Capacity Wt.
G.T.W V.L.
2065125 6508 15,000 5,000 11

 

Master Links

  • Weldable

  Part # Model Dimensions Wt.
Hole Diameter Ring Thickness
2021143 0-49-B 3" 1-5/8" 9

Bolt-On Drawbars

Do not weld or modify.

  Part # Model Dimensions Standard Capacity

Hinged Tongue Capacity

Wt.
A B C D E F G.T.W. V.L.  G.T.W. V.L 
2065137 0-43-D 2-1/2" 17-1/2" 3" 1-1/4" 1-1/4" 2" 20,000 4,000  100,000  500 20
1111238 0-52-D 3" 17-1/4" 3" 1-5/8" 1-5/8" 2" 22,000 4,500  100,000  500 27
1111245 0-42-D 2-3/8" 17-1/4" 3" 3" 1-5/8" 2" 40,000 8,000  100,000  500 40
2068133 0-51-E 3" 15" 3" 2-1/2" 1-5/8" 1-1/2" 35,000 7,000  100,000  500 30
2070131 0-39-D 2-3/4" 15" 3" 1" 1-1/4" 1-1/2 20,000 4,000  100,000  500 16
2071132 0-39-N 2-3/4" 15" 3" 1" 1-1/4" N/D 20,000 4,000  100,000  500 16.5
2062129 0-53-D 3" 17-1/4" 3-1/8" 3-1/8" 1-5/8" 2" 40,000 8,000  100,000  5000 42

 

Wallace Forge recommends replacing all tow rings if there is 1/8" or more of wear to the tow ring.

3" Swivel Drawbar

  • Nut and cotter pin included
  • Drawbar Eye has 2" wide I.D.

  Part # Dimensions Max Capacity  Wt.
A C D Shaft G.T.W G.T.W.
1064120L 9-1/4" 3" 12-1/4" 15" 2" 150,000  2,500  25
1064121S 8-1/8" 3" 11-1/8" 13-7/8" 2" 150,000  2,500  24
1064122SE 10-1/8" 3" 13-1/8" 15-7/8" 2" 150,000  2,500  26
1064123SM 6-1/4" 2-1/2" 8-3/4" 12-5/8" 2" 150,000  2,500  22
1064124K 8-1/8" 3-1/4" 11-3/8" 14-1/8" 2-1/4" 150,000  2,500  28
1064125KSE 10-1/8" 3-1/4" 13-3/8" 16-1/8" 2-1/4" 150,000  2,500  30
1064126KL 9-1/4" 3-1/4" 12-1/2" 15-1/4" 2-1/4" 150,000  2,500  29
1064130SP  Special shaft dimensions per customer request  -



Warning: This equipment should not be used or maintained in a haphazard manner. Inspect for proper installation. Inspect before use for wear and deformation requiring replacement. Replace worn parts with Wallace Forge Company replacement parts. Clean and lubricate properly. Use proper bolts for mounting with proper torque. Wallace Forge recommends replacing all tow rings if there is ⅛” or more of wear to the tow ring.

2-3/8" Swivel Drawbar

  • Nut and cotter pin included
  • Drawbar Eye has 2-3/8" wide I.D.

  Part # Dimensions Max Capacity  Wt.
A C D Shaft G.T.W G.T.W.
2064120L 9-1/4" 3" 12-1/4" 15" 2" 100,000  2,500  25
2064121S 8-1/8" 3" 11-1/8" 13-7/8" 2" 100,000  2,500  24
2064122SE 10-1/8" 3" 13-1/8" 15-7/8" 2" 100,000  2,500  26
2064123SM 6-1/4" 2-1/2" 8-3/4" 12-5/8" 2" 100,000  2,500  22
2064124K 8-1/8" 3-1/4" 11-3/8" 14-1/8" 2-1/4" 100,000  2,500  28
2064125KSE 10-1/8" 3-1/4" 13-3/8" 16-1/8" 2-1/4" 100,000  2,500  30
2064126KL 9-1/4" 3-1/4" 12-1/2" 15-1/4" 2-1/4" 100,000  2,500  29
2064130SP Special Shaft Dimensions Per Customer Request  -



Warning: This equipment should not be used or maintained in a haphazard manner. Inspect for proper installation. Inspect before use for wear and deformation requiring replacement. Replace worn parts with Wallace Forge Company replacement parts. Clean and lubricate properly. Use proper bolts for mounting with proper torque. Wallace Forge recommends replacing all tow rings if there is ⅛” or more of wear to the tow ring.

 

 

Swivel Tow Rings

 

2061127

 

2063126


  Part # Model Dimensions Max Capacity Wt.
A B C D G.T.W V.L.
2061127 0-50-A 2-1/2" 1-1/2" 3-1/2" 1-1/2" 20,000 3,000 10
2062128 0-51-B 3" 1-5/8" 4" 2" 50,000 6,500 16.5
2063126 51337 3"  1-5/8" 8-5/8"  2" 50,000 9,000 24
2010455 51337 in Mounting Block 3"  1-5/8" 8-5/8"  2" 50,000 9,000 40

 

 

Bolt On Tow Rings

2067135 IQ09330
Tow Ring bases are 6"x 6" unless otherwise noted. R-50-A, R-50-B, R-51-A, R-51-B are one piece forging.

 

  Part # Model Dimensions Max Capacity
A B C D F Wt.
2065138 R-48-A 2-1/2" 1" 5/8" 10,000 1,000 11
IQ09330 R-49-A 2-1/2" 1-3/8" 5/8" 42,000 6,000 15
  2066134 R-50-A 2-1/2" 1-3/8" 5/8" 48,000 7,000 15
  2066138 R-50-B 2-1/2" 1-3/8" 3/4" 66,000 19,000 15

2067135 R-51-A 3" 1-5/8" 3/4" 66,000 19,000 21

2067136 R-51-B 3" 1-5/8" 7/8" 90,000 19,000 21
2067139* Custom 3" 1-1/2" N/A - - 24

 

*Minimum hole size for 2067139 is 1/2". Maximum capacity for this Tow Ring depends on hole size.

Tow Ring Mounting Kits
Part # Description
BK580 5/8" Bolt Kit for R-48-A, R-49-A, R-50-A
BK340 3/4" Bolt Kit for R-50-B, R-51-A

Channels

  2376145B

Part # Model Channel Length Max Capacity Wt.
GTW
2373142B 3 Position 8 1/2" 30,000  3
2376145B 5 Position 12 1/2" 30,000  5

2376146 3 Position 7 1/2" 16,000  3

2376148 5 Position 11 1/2" 16,000  5
2376140 6 Position 14 1/2" 16,000  6

2376151 7 Position 16 1/2" 16,000  7

2395165 Grade 8 Bolt Kit - -  4

 

SINCE 1942, WALLACE FORGE COMPANY has proven their worth in
developing new products in the trucking industry to satisfy our customers,
and expand the industry.
Call 330-488-1203